No, Stanley Steemer does not regrout; however, they offer tiles and grout cleaning services to deep-clean grouts and make your floors or walls look new.
What Is Regrouting?
When installing new tiles, the lines between each tile are filled with grouts to hold them together. When these grouts are new, they make the tile and even your space look bright and clean, but after a while, they accumulate dirt, spills, and grime, which discolor the surface and make it difficult to restore the initial brightness. At this point, you either need to hire a professional to deep clean the groups or opt for regrouting.
Regrouting involves removing the old grouts and refilling the space with new grouts to restore brightness to your tiles. While most people end up doing these themselves, it is always preferable to hire a professional to handle this job to get better results.
So, Does Stanley Steemer Regrout?
If you were hoping to hire Stanley Steemer to regrout your floor or bathroom, unfortunately, they do not offer such services. Instead of regrouting, they offer tile and grout cleaning services that involve a refined process to improve the appearance of your surface. This process involves the following;
Deep cleaning the grout with hot steam and some safe alkaline chemicalsSuctioning the grime and dirt extracted from the grout pores after deep cleaningAdding a finishing coat of color or clear sealant to restore the appearance of your surface
The clear sealant will seal the grout from dirt, spills, dust, or anything that can discolor the grout. The color sealant will create a waterproof seal that adds extra protection against discoloration.
How Long Does It Take Stanley Steemer To Clean Tiles And Grout?
For a nonprofessional like you, this task may be a hassle, but with professionals like Stanley Steemer, it takes between 30 minutes to 3 hours to get the job done, depending on the room configuration, the size of the space, and the amount of soil on the grout. Stanley Steemer can finish cleaning the tiles and grout in a 300-square feet room within 30 to 60 minutes; however, the surface may take about 30 minutes to dry completely before you can walk on it and 24 hours for sealant applied to the grout to cure properly.
How Much Does Stanley Steemer Charge For Tile And Grout Cleaning?
Depending on where you live, Stanley Steemer charges $0.75 to $1 per square foot. So for an average space of 300 square feet, you will pay something between $300 and $900. Also, the cost may be influenced by the condition of the grout, whether or not you want deep cleaning, tiles buffering, or sealing.
Is Regrouting My Tiles Worth It?
Yes, regrouting is worth it because even if your old grout isn’t chipped, you can regrout to add some luster to your tiles and improve the overall appearance of your space. Consider regrouting as a minor home improvement task that will give your floor or bathroom roles a new look. Apart from improving the outlook of your surface, it will keep water from getting underneath your tiles and prevent mildew or mold from forming.
Regrouting Or Retiling; Which Is Cheaper?
Regrouting is less expensive than retiling. Unless most of the tiles on your floor are broken and pose danger to you and your household, regrouting is a better option to improve and make your tiles look as good as new. Also, retiling is more expensive because you will have to buy new tiles, pay a professional to install them, and this may take days to be completed. On the other hand, regrouting will save you some time and money and may not need the intervention of a professional.
In Closing
Stanley Steemer does not regrout; however, they offer tiles and grout cleaning services that provide almost the same benefits to your floor or bathroom walls as regrouting would. If the grout on your surface seems dull and dirty, you may want to reach out to them for their cleaning service, but if the grout is chipped and rough, you can find other professionals who offer regrouting services or handle the task yourself.
Can you put new grout over old grout?
Yes, you can, but some of the old grout must be chipped away to create enough space for the new grout to enter.
Can I regrout myself?
Yes, you can regrout by yourself if you have the right tools. The tools include a utility blade or flat scrapper, vacuum cleaner, epoxy or sand-based grout, grout spreader, tile sponge, grout finishing tool, soft cloth, and +sealant.
